Technical Specifications | ||
---|---|---|
Tests | Requirement as per IS: 2202 (Part 1) | Observed Value |
Glue Adhesion Test | No Delamination | No Delamination |
End Immersion Test | No Delamination | No Delamination |
Knife Test | Minimum Pass Standard | Pass Standard |
Edge Loading Test | -Max Deflection %mm -Residual Deflection not > 0.5mm -No Lateral Buckling |
-Deflection Less than 3mm -Deflection Less than.03mm -No Buckling Observed |
Slamming Test | No visual damage after 50 drops | No damage observed |
Screw Withdrawal Strength (N) | Not less than 1000N No visible damage to the surface |
1200-1400N No damage Observed |
Adhesive | Bolling Water Proof (BWP) | Bolling Water Proof (BWP) |